1.Compatibility :The adapter PCI-E card can be inserted in any PCI-E Slot: 1x, 4x, 8x, or 16x.
Version 007 riser kits are the perfect solution for setting up Ethereum mining rigs
(or any other GPU-mined altcoin), whether small open air rigs or large rack based miners,Ethereum mining rigs or any other altcoin mining rigs.
2.Quality:4 High Quality Solid Capacitors, Voltage Regulation, and Overcurrent Protection,so that the graphics card more stable and safe power supply.
3.Safe and reliable:With SATA 15 pin Male to MOLEX 6pin power cable for direct connection to your power supply reduces the power burden on your motherboard
and ensures maximum compatibility with your power supply. .6 pin power connectors available for more stable operation for graphics card while mining.
4.Convenience:PCI-E connector with multi-layer shielded wire, the longest can be connected to 0.6M and will not attenuate the signal.
PCI-E connector plug all gold-plated, more wear and increase the conductivity.
Transfer card enhance power supply, so that the graphics card from the motherboard independent of the board, so as to reduce the burden on the motherboard to accept the graphics card.
5.What You Get:1x PCI-E 16X riser board+1x PCI-E 1X adapter card+1x 60cm USB 3.0 blue cable+1x 6-pin PCI-E power to 15-pin SATA power cable
+Sipolar fan-favorite 12-month warranty and friendly customer service.
This new powered 1x to 16x adapter card could fit any slots on your motherboard. Perfect for instances where video cards are needed outside a case or
for cryptocurrency mining Monero, Xmr, Neucoin, Bitcoin, Litecoin, Dogecoin, Mooncoin or any other Altcoin.
1.Version 007 Powered Riser Card. 6-Pin VGA Power Supply Input.
2. Slot is equipped with a fixed buckle so the card will not fall off from the slot.
3. 1x adapter PCI-E card can be inserted in any PCI-E Slot: 1x, 4x, 8x, or 16x
4.No drivers needed to install.
5.The perfect solution for setting up Ethereum mining rigs, whether small open air rigs or large rack based miners.
6.Holes For attaching the riser card to your rig.
7.Board size: 13cm x 4.3cm x 1.2cm.
8.Gold plated contacts for flawless connectivity and a long lifespan.
1.When plug wire must identify the direction, not to counter or offset, prevent burning equipment,
plug wire when the socket of equipment first, then plug wire, avoid too hard plug socket pin is broken.
2.Big 6 pin for power supply standard parts, please check put in place, when inserted into the power supply plug line must be careful.
1x PCI-E 16X riser board
1x PCI-E 1X adapter card
1x 60cm USB 3.0 cable
1x 6-pin PCI-E power to 15-pin SATA power cable
-1 year Shenzhen Sipolar warranty
-24h customer email support
The post Ver 007 PCIe PCI-E PCI Express Riser Card X1 to X16 USB 3.0 cable adapter for BTC Miner Machine appeared first on yashopasia.com.